Samsung Note7 Clone MT6580 Firmware Flash File

Samsung Note7 Clone MT6580 Firmware Flash File

Initial Steps to Install Firmware on Samsung Note7 Clone   

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Samsung Note7 Clone 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges


Might Also Like:

Samsung Note 3 SM-N900 MT6589 V4.4.2 Firmware Flash File

Samsung S8 Edge SM-G950 Clone MT6580 Firmware Flash File

Download Link

2017-05-15T11:08:37+00:00 May 15th, 2017|Samsung Clone|0 Comments

Leave A Comment