Samsung Galaxy S6 G920F MT6572 Clone Firmware Flash File

Samsung Galaxy S6 G920F MT6572 Clone Firmware Flash File

Preloader_hedy72_w_kk

MT6572__samsung__SM-G920F__zeroflte__5.0.2__ALPS.KK1.MP7.V1.22

Initial Steps to Install Firmware on Samsung Galaxy S6 G920F  

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Samsung Galaxy S6 G920F

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

See detailed Instruction MT flashing sp tool with imges

Might Also Like:

Samsung Galaxy Grand Prime SM-G530H MT6572 Firmware Flash File

Samsung J3 J3109 MT6572 Firmware Flash File

Download Link

2017-05-27T12:20:48+00:00 May 25th, 2017|Samsung Clone|0 Comments

Leave A Comment