Rivo Rhythm Rx50 Official Firmware Flash File

Rivo Rx50 Official Firmware Flash File

  1. Initial Steps to Install Firmware on Rivo Rhythm Rx50 

    1. Download and install MTK  Android USB drivers
    2. Download And Install SP Flash Tool

    How To Flash Rivo Rhythm Rx50

    1. First, you need to download and install sp flash tool
    2. Download and install MTK  Android USB drivers
    3. Then download Firmware file/Flash file/Rom for your phone
    4. Your phone must have 50 % charging before this process
    5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
    6. Now open SPflash tool.exe
    7. When sp flash tool open, go to download button in sp flash tool
    8. In download tab, click on scatter load button
    9. After locating the scatter tab, click on the download button
    10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
    11. Now flashing is completed, a green ring will appear in sp flash tool
    12. Close sp flash tool on your computer and unplug phone
    13. Power on the phone and enjoy
    14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait
    15. See detailed Instruction MT flashing sp tool with imges

Download Link

2017-05-24T15:53:39+00:00 May 24th, 2017|Rivo Mobile|0 Comments

Leave A Comment