Qmobile S4 Blue Lcd Fix Firmware Flash File

Qmobile S4 Blue Lcd Fix Firmware Flash File

No need full flash Only Blue lcd fix file

Initial Steps to Install Firmware on Qmobile S4 Blue Lcd Fix  

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Qmobile S4 Blue Lcd Fix 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
  15. See detailed Instruction MT flashing sp tool with imges

Download Link

2017-02-16T06:15:42+00:00 February 5th, 2017|Q Mobile|2 Comments


  1. Rizwan February 16, 2017 at 6:14 am - Reply

    Need Password

Leave A Comment Cancel reply