Qmobile LT600 Qualcomm Firmware Flash File

Qmobile LT600 Qualcomm Firmware Flash File

Prerequisites for Installing Rom on Qmobile LT600

  • Download and install QPST 2.7.422 with QFIL
  • Download and install Qualcomm USB Drivers.

How To Flash ROM Qmobile LT600

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  3. There should be the device called in device management:
  4. Qualcomm HS-USB QDLoader 9008 (COMXX)
  5. In any other case, you have to install drivers manually.
  6. Run QFIL.
  7. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  8. Load XML in Download Section:
  9. First select RawProgram File: rawprogram0.xml
  10. then Select Patch File: patch0.xml
  11. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  12. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait
  13. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter

See detailed Instruction Qualcomm flashing  QPST tool with imges

Also Like:

QMobile M95 Sc7731GEA irmware lash ile

Qmobile LT500 MT6735 Firmware Flash File

Download Link

2017-05-24T15:51:56+00:00 May 24th, 2017|Q Mobile|0 Comments

Leave A Comment